
Cap-and-trim privacy
A continuous top cap and trim give this wood privacy fence a finished edge. Compare board spacing and the appearance of both faces before settling on the detail.
Hiram · Paulding County
Fence installation, fence and gate repairs, and commercial fencing in Hiram, Georgia. A useful yard starts with a thoughtful gate.
Call or text (678) 245-1920.

A fence for the way you use your property
For a Hiram home, a fence should make the yard easier to use, not turn a short walk into a detour. Compare privacy fencing with a more open picket layout, then place the pedestrian and equipment openings before the line is finalized. If the existing fence works except for the gate, begin with that smaller problem.
Start with the purpose, not just the photograph. We can review the proposed line, gate locations, existing fence condition and your priorities, then discuss a defined installation or repair scope.
Explore Wood Fencing Compare fence typesPlanning your Hiram project
A privacy fence can work well until the opening lands in the wrong place. Sketch the path from driveway to backyard and compare a single walk gate with a wider equipment opening. If the existing boards are sound but the gate drags, assess its frame and supports before replacing the whole run.
Wood gives you the broadest range of traditional board layouts, from full backyard screening to an open rail boundary. Compare the view from both sides, the maintenance you are comfortable with and how the fence will follow the property.
At the property visit, look at both sides, the ground below the proposed line and the approach to each opening. Discuss what stays, what comes out and what will happen at transitions. A written scope should distinguish new work from retained components and identify the workmanship coverage that applies.
Compare the details
Start with the look you like, then compare privacy, access, care and the needs of your property.

A continuous top cap and trim give this wood privacy fence a finished edge. Compare board spacing and the appearance of both faces before settling on the detail.

This rear view shows the rails and posts behind a vertical-board privacy fence. Discuss which face will show from your property and how the line will meet changes in grade.

Open spacing lets light and views through the fence. Match the gate's picket pattern and review the openings around pets, children and everyday access.

A curved upper profile adds a decorative rhythm between posts. Confirm the height at the peaks and low points, the board spacing and the matching gate treatment.
Compare the details
Start with the look you like, then compare privacy, access, care and the needs of your property.

Solid gray infill gives a consistent screened boundary. Confirm the selected color, post reinforcement and gate framing in the written proposal.

White panels and capped posts create a clean privacy fence. Review the panel system, height, care instructions and the amount of screening you need.

The corner and return are part of the finished design, not an afterthought. Discuss transitions, post locations and how the panels meet changes in level.
Other fence types

Vinyl privacy and boundary fencing, planned with the right layout, gates, and finish for your property.
Take a closer look
Aluminum fencing for yards, pool areas, and business properties, with coordinated gates and a finished perimeter.
Take a closer lookA closer look
A walk gate should connect the routes you actually use. A wider opening may be needed for mowers, equipment or deliveries. Mark those paths on your sketch and discuss latch access, travel direction and the room needed on both sides.
For an automatic driveway or commercial gate, include who needs access, power arrangements and a separate pedestrian route in the initial conversation. We can review gates as a standalone project or as part of the fence installation.
A damaged panel and a failing line are not the same problem. Compare the posts at ground level, rail connections, adjacent sections and gate supports. A localized repair can be sensible when the retained components remain serviceable.
Send a close-up, a wider view and a description of what changed. For powered gates, avoid unsafe operation and include equipment identification only if it is safely accessible. Photos help us prepare; the final scope may require an on-site assessment.
Before the first post in Hiram
Hiram lists a city zoning administrator and states that rezoning, special-use and land-use matters are handled through Paulding County's planning office. Hiram zoning information.
Ask which office should review the specific fence location and scope. The city's shared planning arrangement should not be read as an automatic fence approval or a countywide exemption.
Official resource checked September 21, 2026. Requirements can change; confirm the current rules for your parcel and proposed work before construction.
Bring these details
Municipal approval and private design approval are separate. Identify easements and coordinate utility locating before digging; do not use an existing fence as proof of a property line.
Use our planning checklistRepairs are welcome in Hiram
A dragging gate may need work at the hinges, latch or supporting post. Include a photo with the gate both open and closed so we can discuss clearance as well as alignment.
Text a wider view and a close-up to (678) 245-1920, along with your name and location. Photos help start the conversation; we may need an on-site assessment to define the work. We will discuss the condition of the components that stay, not just the parts being replaced.
Fence repair options Gate repair optionsCommercial fencing in Hiram
For a customer-facing site, tell us which entrance must remain usable and whether pedestrian access needs to be separated from service vehicles.
Send plans or specifications, the project location and any bid deadline. Identify fence length, materials, openings, removal work and the access that must stay available. Commercial and repair work have separate warranty terms from qualifying new residential installations.
Commercial fencing & bid work Commercial gate optionsWorking with DJ Fence & Gate
Share the Hiram project location, the problem or goal, and photos. Include any timing needs without assuming a start date.
Discuss the layout, supports, gate access and approvals. Confirm the selected materials and any work that will remain.
Review what is included, what is excluded and the applicable warranty. Financing is available; ask about options for your project.
Before we get started
Yes. Send the opening width, photos and a description of the problem. We will discuss the condition of the gate and its supports before defining the repair or replacement.
The material, height, measured length, number and construction of gates, removal work, site access and ground conditions all affect the scope. A survey or layout and a few photos help us prepare; an accurate proposal should identify the selected system and what work is included.
Yes. Wood Fencing is one starting point for this guide, not a requirement for every property. Tell us whether privacy, an open view, animal containment, pool access or commercial use matters most. We can compare suitable layouts and review the restrictions that apply to your parcel.
Yes. We welcome residential installations, fence and gate repairs, and commercial inquiries in our Paulding County service area. Send the actual project address so we can confirm the location and scope.
Send your name, contact information, project location and a description of the work. Photos, a rough layout, existing surveys and any written design requirements help us discuss the next step.
Qualifying complete new residential installations have lifetime workmanship coverage for the original customer while they own the property. Repairs generally have one year of workmanship coverage and exclude existing components. Commercial work follows its written agreement, otherwise one year. Read the full warranty for gate terms and exclusions.
The experience behind the work
DJ Fence & Gate is led by Dusty Johnson, who brings 27 years of hands-on fencing experience. We are licensed and insured, based in Paulding County, and ready to help with residential, repair and commercial projects.
Your project starts with a clear written scope: the materials, gates, work to be retained, removal work and applicable warranty should all be understood before construction.
We meet you at the project property by appointment. No showroom visit is required, and smaller repairs are welcome.
Get to know DJ Fence & Gate Read our written warrantyWe stand behind our work
Qualifying complete new residential installations are covered for as long as the original customer owns the property. Non-transferable. Material defects, natural wood changes, and other exclusions apply. Repairs and commercial work have separate terms.
Your county hub
Explore the county overview for nearby communities, broader service information and county planning resources.
Explore Paulding CountyPaulding County
Local fence planning, repair options and project guidance. Each guide connects back to our Paulding County service area.
Let’s get it taken care of
Share the location and a few details. We’ll follow up to discuss the work, answer questions, and arrange the next step.
(678) 245-1920Have photos? Text them to our main number. For commercial plans, email your documents or include a sharing link in the form.