Privacy fencing
Discuss the areas you want screened and how the fence will look from inside and outside the yard.
Wood Fencing
Wood privacy, shadowbox, picket, and cap-and-trim fencing, with gates and a layout that fit your yard.
Call or text (678) 245-1920.

Wood Fencing with DJ Fence & Gate
Wood fencing gives you several ways to define a yard, from a solid privacy line to a more open picket or shadowbox design. We’ll help you compare the look you want with the layout and access your property needs.
The estimate should make the construction clear: material selection, height, style, post layout, gate openings, and the work included around an existing fence. If you have an HOA-approved design, bring it with you rather than relying on a similar-looking photo.
For an existing wood fence, we can discuss repairs before replacement. A damaged board and a failing support are not the same problem. We’ll look at the condition of the surrounding fence and explain what a targeted repair would involve.
The details that matter
Discuss the areas you want screened and how the fence will look from inside and outside the yard.
Explore a more open layout where a defined boundary is the goal rather than a solid visual screen.
Review finishing details and how they carry through corners, transitions, and gate openings.
Assess damaged boards, rails, posts, and gates with the rest of the fence in view.
Compare the details
Start with the look you like, then compare privacy, access, care and the needs of your property.

A continuous top cap and trim give this wood privacy fence a finished edge. Compare board spacing and the appearance of both faces before settling on the detail.

This rear view shows the rails and posts behind a vertical-board privacy fence. Discuss which face will show from your property and how the line will meet changes in grade.

Open spacing lets light and views through the fence. Match the gate's picket pattern and review the openings around pets, children and everyday access.

A curved upper profile adds a decorative rhythm between posts. Confirm the height at the peaks and low points, the board spacing and the matching gate treatment.

Rustic rails define the boundary while wire adds a closer-spaced enclosure. Wire type, openings, height and bottom clearance must suit the intended animal or use.

Straight horizontal boards create an open landscape boundary. Discuss the number of rails, wire specification and gate width as a complete containment plan.

Decorative diagonal framing adds character to a wood privacy fence. Compare the finished face, cap detail and adjoining gate.

A curved picket line frames a garden without closing off the view. Check the low points, picket openings and the needs of children or pets.

An open X-pattern defines a larger property or landscape edge. Add appropriately specified wire when containment, rather than appearance alone, is the goal.
A closer look
Ask us to compare pressure-treated pine and cedar for the selected design and current availability. The estimate should identify the lumber, boards, rails and posts rather than describe everything simply as a wood fence. Steel-post options can also be discussed when you want a wood appearance with a different support system.
Pickets create the visible face, rails carry the boards between posts, and posts support the run. A decorative cap or trim board changes the finish, but it is not a substitute for a properly planned structure. Gate posts and gate frames deserve separate attention because they carry moving loads.
Stockade and board-on-board are useful starting points for backyard privacy. Shadowbox, spaced horizontal and picket styles have more open sightlines. Stand where you actually use the patio or yard and consider the view from an angle, not just straight on.
For a shared boundary, discuss which face will be visible from each property and what local or private design rules require. A photo can help communicate the look, but the written scope should settle board orientation, spacing, cap detail and gate treatment.
A fence can be laid out to step with changes in level or follow a grade where the selected construction permits. Neither approach is right for every yard. Review the bottom clearance, corners, retaining features and gate locations before deciding on the layout.
A gate placed on a slope may need a different swing direction or opening arrangement. Include mower width, deliveries, bins and future landscape access in that discussion. Keep drainage routes in view rather than using boards to block an unresolved runoff problem.
Ask about cleaning and finishing appropriate to the chosen lumber. New wood should be ready for the selected finish before stain or sealer is applied; timing depends on the material, conditions and product instructions, not a universal number of days.
Project cost changes with length, height, lumber selection, design complexity, gate count, site access and removal work. For an existing fence, sound rails and posts may make a limited board repair practical. Natural checking, color change and movement are different from installation workmanship defects.
See the possibilities


Use these design examples to compare layouts, finishes and openings. Share the details you like when you request an estimate.

A clear way forward
Photos or HOA requirements help establish the look you want.
Allow for daily use and the equipment that needs access.
Discuss what is included in the installation and any separate finishing or maintenance work.
Natural wood changes such as checking, warping, and discoloration are excluded from workmanship coverage.
We stand behind our work
Qualifying complete new residential installations are covered for as long as the original customer owns the property. Non-transferable. Material defects, natural wood changes, and other exclusions apply. Repairs and commercial work have separate terms.
Before we get started
We can review the existing style and dimensions. New material may not match aged or weathered wood exactly, and availability can affect the options.
Do not assume it is included. Ask us to identify any finishing work specifically in the written scope.
The supplied workmanship warranty excludes natural wood characteristics, including warping, checking, cracking, shrinking, and discoloration. Material and workmanship coverage are different.
We can assess that. The condition of the rails, posts, and surrounding fence helps determine whether a board-only repair makes sense.
Not from every angle. Alternating boards create partial screening while leaving openings. Compare it with stockade or overlapping board-on-board if blocking sightlines is your main goal.
Ask about a compatible steel-post option for your chosen layout. Availability, post details, gate supports and any finish requirements should be included in the proposal.
New wood can differ noticeably from weathered boards. We can discuss material and profile matching, but an exact color match should not be assumed.
We can review stepped and grade-following approaches against the actual terrain and selected style. Pet clearance, drainage and gate travel are part of that decision.
Explore your options

Leaning posts, broken boards, storm-damaged sections, and everyday wear. Let’s look at what can be fixed before you commit to a whole new fence.
Take a closer look
Walk gates, driveway entrances, and commercial openings designed around the way people and vehicles use your property.
Take a closer look
Commercial fencing, repairs, gates, and access control for property owners, facility teams, general contractors, and public-sector projects.
Take a closer lookClose to the work
Based in Paulding County, with residential and commercial service across these eight counties.
Let’s get it taken care of
Share the location and a few details. We’ll follow up to discuss the work, answer questions, and arrange the next step.
(678) 245-1920Have photos? Text them to our main number. For commercial plans, email your documents or include a sharing link in the form.