
Chain link with privacy screening
Screening changes both visibility and wind exposure. Review the fabric, supports, local restrictions and suitability of adding a screen to the selected fence system.
Rockmart · Polk County
Fence installation, fence and gate repairs, and commercial fencing in Rockmart, Georgia. Keep the boundary out of the way of the entrance.
Call or text (678) 245-1920.

A fence for the way you use your property
A Rockmart fence can define a work yard or home without making entry awkward. Chain link offers an open boundary; privacy and ornamental options serve different goals. Work through the gate swing, driveway approach and pedestrian route before deciding exactly where the line should run.
Start with the purpose, not just the photograph. We can review the proposed line, gate locations, existing fence condition and your priorities, then discuss a defined installation or repair scope.
Explore Chain-Link Fencing Compare fence typesPlanning your Rockmart project
For a yard or shop enclosure, list the widest vehicle or equipment that must pass through. A paired swing gate and a sliding arrangement need different clear space. For an existing chain-link line, look at the top rail and posts as well as the damaged fabric when defining repairs.
Chain link is a practical option for an open yard boundary, an equipment area or a commercial perimeter. Its useful details are often in the specification: fabric, framework, terminals, gates and any screening.
At the property visit, look at both sides, the ground below the proposed line and the approach to each opening. Discuss what stays, what comes out and what will happen at transitions. A written scope should distinguish new work from retained components and identify the workmanship coverage that applies.
Compare the details
Start with the look you like, then compare privacy, access, care and the needs of your property.

Screening changes both visibility and wind exposure. Review the fabric, supports, local restrictions and suitability of adding a screen to the selected fence system.

This galvanized perimeter includes a security topping. Specialized toppings need a site-specific review of safety, restrictions, access and the commercial specification.

A dark finish makes the fence less visually prominent against the landscape. Match fabric, posts, rails and gate frames, and plan how the line follows the terrain.

An uncoated metallic finish creates a practical open boundary. Compare mesh, wire gauge, posts and gate framing rather than choosing by color alone.
Compare the details
Start with the look you like, then compare privacy, access, care and the needs of your property.

A continuous top cap and trim give this wood privacy fence a finished edge. Compare board spacing and the appearance of both faces before settling on the detail.

This rear view shows the rails and posts behind a vertical-board privacy fence. Discuss which face will show from your property and how the line will meet changes in grade.

Open spacing lets light and views through the fence. Match the gate's picket pattern and review the openings around pets, children and everyday access.
Other fence types

Wood privacy, shadowbox, picket, and cap-and-trim fencing, with gates and a layout that fit your yard.
Take a closer look
Ornamental steel fences and gates for residential entrances, property boundaries, and commercial projects.
Take a closer lookA closer look
A walk gate should connect the routes you actually use. A wider opening may be needed for mowers, equipment or deliveries. Mark those paths on your sketch and discuss latch access, travel direction and the room needed on both sides.
For an automatic driveway or commercial gate, include who needs access, power arrangements and a separate pedestrian route in the initial conversation. We can review gates as a standalone project or as part of the fence installation.
A damaged panel and a failing line are not the same problem. Compare the posts at ground level, rail connections, adjacent sections and gate supports. A localized repair can be sensible when the retained components remain serviceable.
Send a close-up, a wider view and a description of what changed. For powered gates, avoid unsafe operation and include equipment identification only if it is safely accessible. Photos help us prepare; the final scope may require an on-site assessment.
Before the first post in Rockmart
Rockmart's published code prohibits gates from opening outward onto a sidewalk, street or other public way and contains corner-visibility provisions. Rockmart published code of ordinances.
Confirm the current rules with the city because a published code edition may not include later amendments. Sketch the entire gate swing and preserve clear views at driveways and corners rather than considering only the closed position.
Official resource checked September 21, 2026. Requirements can change; confirm the current rules for your parcel and proposed work before construction.
Bring these details
Municipal approval and private design approval are separate. Identify easements and coordinate utility locating before digging; do not use an existing fence as proof of a property line.
Use our planning checklistRepairs are welcome in Rockmart
For a gate that catches the ground, show the approach surface and the full opening. An adjustment that works at one point may still leave a problem across the swing.
Text a wider view and a close-up to (678) 245-1920, along with your name and location. Photos help start the conversation; we may need an on-site assessment to define the work. We will discuss the condition of the components that stay, not just the parts being replaced.
Fence repair options Gate repair optionsCommercial fencing in Rockmart
For commercial entrances, share truck movements, hours and whether the gate will be manual or automated. Operator and safety requirements belong in the initial scope.
Send plans or specifications, the project location and any bid deadline. Identify fence length, materials, openings, removal work and the access that must stay available. Commercial and repair work have separate warranty terms from qualifying new residential installations.
Commercial fencing & bid work Commercial gate optionsWorking with DJ Fence & Gate
Share the Rockmart project location, the problem or goal, and photos. Include any timing needs without assuming a start date.
Discuss the layout, supports, gate access and approvals. Confirm the selected materials and any work that will remain.
Review what is included, what is excluded and the applicable warranty. Financing is available; ask about options for your project.
Before we get started
Rockmart's published code prohibits an outward-opening gate over a sidewalk, street or public way. Confirm the current rule and design a suitable opening within the property.
The material, height, measured length, number and construction of gates, removal work, site access and ground conditions all affect the scope. A survey or layout and a few photos help us prepare; an accurate proposal should identify the selected system and what work is included.
Yes. Chain-Link Fencing is one starting point for this guide, not a requirement for every property. Tell us whether privacy, an open view, animal containment, pool access or commercial use matters most. We can compare suitable layouts and review the restrictions that apply to your parcel.
Yes. We welcome residential installations, fence and gate repairs, and commercial inquiries in our Polk County service area. Send the actual project address so we can confirm the location and scope.
Send your name, contact information, project location and a description of the work. Photos, a rough layout, existing surveys and any written design requirements help us discuss the next step.
Qualifying complete new residential installations have lifetime workmanship coverage for the original customer while they own the property. Repairs generally have one year of workmanship coverage and exclude existing components. Commercial work follows its written agreement, otherwise one year. Read the full warranty for gate terms and exclusions.
The experience behind the work
DJ Fence & Gate is led by Dusty Johnson, who brings 27 years of hands-on fencing experience. We are licensed and insured, based in Paulding County, and ready to help with residential, repair and commercial projects.
Your project starts with a clear written scope: the materials, gates, work to be retained, removal work and applicable warranty should all be understood before construction.
We meet you at the project property by appointment. No showroom visit is required, and smaller repairs are welcome.
Get to know DJ Fence & Gate Read our written warrantyWe stand behind our work
Qualifying complete new residential installations are covered for as long as the original customer owns the property. Non-transferable. Material defects, natural wood changes, and other exclusions apply. Repairs and commercial work have separate terms.
Your county hub
Explore the county overview for nearby communities, broader service information and county planning resources.
Explore Polk CountyPolk County
Local fence planning, repair options and project guidance. Each guide connects back to our Polk County service area.
Let’s get it taken care of
Share the location and a few details. We’ll follow up to discuss the work, answer questions, and arrange the next step.
(678) 245-1920Have photos? Text them to our main number. For commercial plans, email your documents or include a sharing link in the form.